LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Body -- Model 3 >> Bumper/Fascia >> Rear Bumper Fascia - Rear Fascia Center Bracket - Remove And Replace >> Remove

Rear Bumper Fascia - Rear Fascia Center Bracket - Remove And Replace: Remove

  1. Remove the rear fascia. See BUMPER AND FASCIA - REAR BUMPER FASCIA - REAR FASCIA - REMOVE AND INSTALL .
  2. Remove the clip that attaches the BLE to the rear center bracket.
    G16587454Courtesy of TESLA, INC.
  3. Release the clips (x5) that attach the electrical harness to the rear center bracket.
    G16587455Courtesy of TESLA, INC.
  4. Remove the bolts (x5) and clips (x2) that attach the rear center bracket to the body.

    Tip: Use of the following tool(s) is recommended:

    • Cordless hex driver
    • 10 mm socket
    G16587456Courtesy of TESLA, INC.
    G16587457Courtesy of TESLA, INC.
    G16587458Courtesy of TESLA, INC.
  5. Remove the rear center bracket from the vehicle.
    G16587459Courtesy of TESLA, INC.