Rear Bumper Fascia - Rear Fascia Center Bracket - Remove And Replace: Install

Install the bolts (x5) and clips (x2) that attach the rear center bracket to the body.
4 N.m (2.9 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 4 in extension
- 10 mm socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the clips (x5) that attach the electrical harness to the rear center bracket.

Courtesy of TESLA, INC.
Install the clip that attaches the BLE to the rear center bracket.

Courtesy of TESLA, INC.
Install the rear fascia. See BUMPER AND FASCIA - REAR BUMPER FASCIA - REAR FASCIA - REMOVE AND INSTALL .