Rear Bumper Fascia - Fascia - Rear Lower Assembly - Remove And Replace: Install

Install the tabs (x19) that attach the lower fascia to the upper fascia from either side.
CAUTION: Take care not to damage painted fascia.

Courtesy of TESLA, INC.
Install the LH and RH rear fascia lamp assemblies. See TAIL LIGHTS - LAMP ASSEMBLY, REAR FASCIA LAMP, LH - REMOVE AND REPLACE .
Install the bolts (x4) that attach the lower rear fascia to the upper rear fascia.
3 N.m (2.2 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 10 mm socket
- Cordless Ratchet/Impact Driver
Courtesy of TESLA, INC.
Install the rear fascia diffuser. See REAR UNDERTRAY AND DIFFUSER - DIFFUSER ASSEMBLY, REAR FASCIA - REMOVE AND REPLACE .