Rear Undertray And Diffuser - LH Rear Suspension Cover - Remove And Replace: Remove
- Raise and support the vehicle. See RAISE VEHICLE - 2 STANDS .
- Remove the bolt that attaches the rear suspension cover to the LH lower rear control arm assembly.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 10 mm deep socket
- Ratchet/torque wrench
- Release the tabs (x2) that attach the rear suspension cover to the LH lower rear control arm assembly, and then remove the LH rear suspension cover from the vehicle.