Trailer Hitch - Rear Energy Absorber - Retrofit: Notes

Last modified: 19/07/2024 07:10:26

Fig 1: Rear Energy Absorber (Retrofit) Trailer Hitch Component Location

Courtesy of TESLA, INC.

NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.

Revision History:

2024-07-19: Added (temporary) Note to Installation step 9, clarifying the instruction to select "TESLA_REV1" to avoid alerts being set.
2024-05-16: Added instructions to prevent corrosion on EU trailer sockets.
2024-01-22: Changed configuration value from TESLA_REV2 to TESLA_REV1.