Front And Rear Door Glass - Glass, Front Door LH - Remove And Replace: Remove
- Remove the LH front door reflector. See INTERIOR TRIM - DOOR TRIM - FRONT DOOR TRIM PAD - DOOR REFLECTOR - REMOVE AND REPLACE .
- Remove the LH front door tweeter. See FRONT DOOR TRIM PAD - DOOR TRIM, TWEETER ASSEMBLY, FRONT LH - REMOVE AND REPLACE .
- Remove the LH front door puddle light. See INTERIOR TRIM - DOOR TRIM - FRONT DOOR TRIM PAD - PUDDLE LAMP - REMOVE AND REPLACE .
- Remove the LH front door trim panel. See INTERIOR TRIM - DOOR TRIM - FRONT DOOR TRIM PAD - DOOR TRIM ASSEMBLY - LH - REMOVE AND REPLACE .
- Remove the LH front door outer belt seal. See FRONT DOOR SEALS - FRONT DOOR OUTER BELT ASSEMBLY LH - BLACK - REMOVE AND REPLACE .
- Remove the plugs that cover the openings in door for access to the regulator isolator clamps.
- Connect the window switch tool to the LH front door electrical harness, and then position the door glass so that the regulator isolator clamp bolts are accessible from the holes.
- Remove and discard the bolts (x2) that attach the door glass to the regulator isolator clamps, and then remove the door glass from the door.
Tip: Use of the following tool(s) is recommended:
- 13 mm socket
- 2 in extension
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench (for installation only)
WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.multimedia:A supplement to the article is available.NOTE: Replace the regulator isolation clamps, if damaged. - Remove the LH front door glass.