LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body -- Model 3 >> Bumper/Fascia >> Rear Energy Absorber - Assembly Rear Bumper Beam - Extrusion - Remove And Replace >> Notes

Rear Energy Absorber - Assembly Rear Bumper Beam - Extrusion - Remove And Replace: Notes

Last modified: 17/10/2023 18:48:13

Fig 1: Rear Bumper Beam Component Location
G16587389Courtesy of TESLA, INC.
NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.