LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body -- Model 3 >> Bumper/Fascia >> Front Bumper Carrier - Reinforcement LH, Front Fascia - Remove And Replace >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS - FRONT BUMPER CARRIER - REINFORCEMENT LH, FRONT FASCIA (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x2) that attach the fascia reinforcement to the front end of carrier 5 N.m (3.7 lbs-ft) 
  • 4 in extension
  • 10 mm deep socket
  • Cordless hex driver
  • Ratchet/torque wrench (for installation only)
Reuse