Front Door Latch And Striker - Side Door Striker, High Load - Remove And Replace: Install
- Hand-tighten the bolts (x2) that attach the LH front door striker to the body.
- Close the LH front door and verify the door position; adjust the position of the striker and verify fitment, if necessary.WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.multimedia:A supplement to the article is available.
- Tighten the bolts (x2) that attach the LH front door striker to the body.
26 N.m (19.2 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- Torx T40 socket
- Ratchet/torque wrench
- Remove the masking tape from the body.
- Close the LH front door.