2nd Row Seat Back Hardware - 2nd Row Seatback Striker - Remove And Replace: Install

Install the bolts (x2) that attach the seat back striker to the body.
16 N.m (11.8 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Torx T40 socket
- Cordless Ratchet/Impact Driver
- Flex head ratchet/flex head torque wrench (for installation only)
Courtesy of TESLA, INC.
Install the clips (x5) that attach the front of the package tray to the body.

Courtesy of TESLA, INC.
Install the RH upper C-pillar trim. See A - B - C POST INTERIOR TRIM - C PILLAR, ASSEMBLY, LH - REMOVE AND REPLACE .
Install the RH side rail trim. See A - B - C POST INTERIOR TRIM - SIDE RAIL ASSEMBLY, LH - REMOVE AND REPLACE .
Install the LH upper C-pillar trim. See A - B - C POST INTERIOR TRIM - C PILLAR, ASSEMBLY, LH - REMOVE AND REPLACE .
Install the LH and RH 2nd row seat side bolsters. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
Install the LH side rail trim. See A - B - C POST INTERIOR TRIM - SIDE RAIL ASSEMBLY, LH - REMOVE AND REPLACE .
Move the LH and RH front seats to original position.
Raise all four windows and close all four doors.