2nd Row Seat Back Hardware - 2nd Row Seatback Hinge Bracket Assembly - LH - Remove And Replace: Install
- Install the bolt that secures the LH 2nd row seat back hinge bracket to the seat back.
45 N.m (33.2 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 13 mm socket
- 3 in extension
- Flex head ratchet/flex head torque wrench (for installation only)
- Install the clip that secures the seat heater connector to the hinge bracket.
- Install the LH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - LH - REMOVE AND REPLACE .
- Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Install the LH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .