LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats -- Model 3 >> 2nd Row Seat Assemblies and Hardware >> 2nd Row Seat Back Hardware - 2nd Row Seatback Handle Bezel - LH - Remove And Replace >> Install

2nd Row Seat Back Hardware - 2nd Row Seatback Handle Bezel - LH - Remove And Replace: Install

  1. Install the LH 2nd row seat back handle bezel into the LH 2nd row seat back handle assembly, and then fasten the clips (x2) that attach the bezel to the handle assembly.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    multimedia:A supplement to the article is available.
  2. Unfold the LH 2nd row seat back so that it is upright and secured.
  3. Raise the LH rear window.
  4. Close the LH rear door.
scientia non olet · About LEMON Manuals