2nd Row Seat Assemblies - 2nd Row Armrest System - Remove And Replace: Install

Place the center armrest onto the seat frame and push it inward to make sure all clips are installed in place.
WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

multimedia:A supplement to the article is available.

Courtesy of TESLA, INC.
Install the bolts (x2) that secure the center armrest bracket to the seat frame.
25 N.m (18.4 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- Torx T40 socket
- Flex head ratchet/flex head torque wrench (for installation only)
Courtesy of TESLA, INC.
Install the 2nd row armrest closeout. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW TRIM - BLACK ARMREST CLOSEOUT ASSEMBLY - REMOVE AND REPLACE .
Install the 2nd row LH seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
Install the 2nd row LH seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .