Dash Support Frame - IP Riser Bracket, RH - Remove And Replace: Remove
- Remove the RH center console front side panel. See CENTER CONSOLE - CONSOLE SIDE PANEL, CARPET, RH, LHD - REMOVE AND REPLACE .
- Remove the bolt that attaches the RH cross bar beam bracket to the cross beam.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 13 mm socket
- Flex head ratchet/flex head torque wrench
- Remove the nut that attaches the RH cross bar beam bracket to the cross beam.
Tip: Use of the following tool(s) is recommended:
- 13 mm socket
- Cordless Ratchet/Impact Driver
- Flex head ratchet/flex head torque wrench
- Remove the RH cross bar beam from the vehicle.