Dash Panel - IP Lower, Assembly - Remove And Replace: Install
- Install the screw and fasten the tabs (x13) that attach the lower instrument panel to the instrument panel, and then install the panel to the vehicle.
2.3 N.m (1.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- Torx T20 socket
- Install the instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
- Install the LH front primary door seal.
- Install the LH footwell cover. See DASH PANEL - DRIVER FOOTWELL COVER ASSEMBLY - REMOVE AND REPLACE
- Raise the LH front window and close the LH front door.