LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electrical System (2 Of 2) -- Model 3 >> Wipers and Washers >> Electrical - Wipers and Washers - Windshield Washer Bottle and Pump - Washer Bottle - Remove And Replace >> Remove

Electrical - Wipers and Washers - Windshield Washer Bottle and Pump - Washer Bottle - Remove And Replace: Remove

  1. Remove the windshield washer reservoir assembly. See ELECTRICAL - WIPERS AND WASHERS - WINDSHIELD WASHER BOTTLE AND PUMP - WASHER BOTTLE ASSEMBLY - REMOVE AND REPLACE .
  2. Remove the windshield washer pump and pump grommet from the windshield washer reservoir.
    NOTE: Inspect the washer pump grommet for damage and replace as necessary.
    G16596471Courtesy of TESLA, INC.
    G16596472Courtesy of TESLA, INC.
  3. Use a plastic trim tool to gently pry the washer level sensor and sensor grommet from the washer reservoir.
    CAUTION: Be careful not to damage the sensor.
    NOTE: Inspect the washer level sensor grommet for damage and replace as necessary.
    G16596473Courtesy of TESLA, INC.
    G16596474Courtesy of TESLA, INC.
  4. Use a plastic trim tool to remove the cap from the windshield washer reservoir.
    NOTE: The cap and the retaining collar are a single piece.
    G16596475Courtesy of TESLA, INC.
    G16596476Courtesy of TESLA, INC.
  5. Remove the windshield washer reservoir.
    G16596477Courtesy of TESLA, INC.