Electrical - Cameras - Side Repeater Camera - Side Repeater Camera, LH - Remove And Replace: Install

Position the LH front side repeater camera on the side repeater assembly, and then install the bolts (x2) that attach the camera to the side repeater assembly.
0.6 N.m (5 lbs-in)

NOTE: Wiggle the camera o-ring through the side repeater assembly, and then install the bolts that attach the camera to the side repeater assembly.

Tip: Use of the following tool(s) is recommended:
- Torx T8 bit
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the LH front side repeater assembly. See FRONT LIGHTS - ASSEMBLY, SIDE REPEATER LH - REMOVE AND REPLACE .