LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model 3 >> Front Seat Covers Pads and Trims >> Front Seat Covers And Pads - 1st Row Sideshield Carrier, LH - Remove And Replace >> Install

Front Seat Covers And Pads - 1st Row Sideshield Carrier, LH - Remove And Replace: Install

  1. Push the driver seat outboard side shield carrier forward to secure the rear tabs (x2) into the seat frame, and then rotate the carrier to install it to the seat assembly.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    multimedia:A supplement to the article is available.
  2. Install the front clips (x2) that attach the driver seat outboard side shield carrier to the seat assembly.
    G16589264Courtesy of TESLA, INC.
  3. Install the driver seat outboard side shield assembly. See FRONT SEAT COVERS AND PADS - 1ST ROW OUTBOARD SIDESHIELD, LH - REMOVE AND REPLACE .
scientia non olet · About LEMON Manuals