LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats -- Model 3 >> 2nd Row Seat Covers Pads and Trims >> 2nd Row Seat Covers And Pads - 2nd Row Seat Back Trim, LH - Remove And Replace >> Install

2nd Row Seat Covers And Pads - 2nd Row Seat Back Trim, LH - Remove And Replace: Install

  1. Starting from the upper seat back, feed the seat belt through the upholstery cover, and then install the LH 2nd row seat back upholstery cover.
    NOTE: Massage the Velcro while working downward toward the center of the seat back.
    G16589309Courtesy of TESLA, INC.
    G16589310Courtesy of TESLA, INC.
  2. Use hog ring pliers to crimp new hog rings (1566544-00-A) (x3) to the LH 2nd row seat back upholstery cover at the center of the seat back.
    NOTE: Place the hog ring into the hog ring pliers prior to installation.
    NOTE: Push down on the foam to gain access to the rings.
    G16589311Courtesy of TESLA, INC.
    G16589312Courtesy of TESLA, INC.
  3. Attach the remaining portion of the LH 2nd row seat back upholstery cover to the seat back.
    G16589313Courtesy of TESLA, INC.
  4. Install the lower portion of the LH 2nd row seat back upholstery cover to the pivot bar.
    G16589314Courtesy of TESLA, INC.
    G16589315Courtesy of TESLA, INC.
  5. Put the electrical harness through the LH 2nd row seat back upholstery cover.
    G16589316Courtesy of TESLA, INC.
  6. Hook the LH seat back armrest upholstery wire that attach the LH 2nd row seat back upholstery cover to the seat back frame.
    G16589317Courtesy of TESLA, INC.
  7. Install the clips (x2) that attach the cover plate to the seat assembly.
    G16589318Courtesy of TESLA, INC.
  8. Install the 2nd row armrest. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW ARMREST SYSTEM - REMOVE AND REPLACE .
  9. Install the 2nd row armrest closeout. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW TRIM - BLACK ARMREST CLOSEOUT ASSEMBLY - REMOVE AND REPLACE .
  10. Install the 2nd row center escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .
  11. Install the LH 2nd row seat back handle bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HANDLE BEZEL - LH - REMOVE AND REPLACE .
  12. Install the LH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
  13. Install the LH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - LH - REMOVE AND REPLACE .
  14. Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
  15. Install the LH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
scientia non olet · About LEMON Manuals