LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Trim (Model 3) >> Pillar and Sill Trim >> Trim - B-Pillar - Middle - LH - Remove And Replace >> Install

Trim - B-Pillar - Middle - LH - Remove And Replace: Install

  1. Align the positioning clips (x3) to the slots, and then install the clips that attach the B-pillar middle trim to the vehicle.
    NOTE: Make sure that the door seal corretly overlaps the LH middle B-pillar trim.
    G16590237Courtesy of TESLA, INC.
  2. Install the LH lower B-pillar trim. See A - B - C POST INTERIOR TRIM - B - PILLAR LOWER ASSEMBLY, LH - REMOVE AND REPLACE .
  3. Install the LH lower A-pillar trim. See A - B - C POST INTERIOR TRIM - A - PILLAR LOWER ASSEMBLY, LH - REMOVE AND REPLACE .
  4. Install the LH instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
  5. Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
  6. Install the 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
scientia non olet · About LEMON Manuals