A - B - C Post Interior Trim - C Pillar, Assembly, LH - Remove And Replace: Install
- Feed the seatbelt through the LH C-pillar trim, and then remove the trim.
- Install the clips (x3) and tabs (x3) that attach the C-pillar trim to the vehicle.
- Install a new bolt that attaches the LH seatbelt anchor to the body.
30 N.m (22.1 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 3 in extension
- 15 mm socket
- Cordless Ratchet/Impact Driver
- Flex head ratchet/flex head torque wrench
- Install the LH side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
- Install the LH side rail trim. See A - B - C POST INTERIOR TRIM - SIDE RAIL ASSEMBLY, LH - REMOVE AND REPLACE .