LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Trim (Model 3) >> Pillar and Sill Trim >> A - B - C Post Interior Trim - C Pillar Bracket Assembly, LH - Remove And Replace >> Remove

A - B - C Post Interior Trim - C Pillar Bracket Assembly, LH - Remove And Replace: Remove

  1. Remove the LH side rail trim. See A - B - C POST INTERIOR TRIM - SIDE RAIL ASSEMBLY, LH - REMOVE AND REPLACE .
  2. Remove the LH side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
  3. Remove the LH C-pillar trim. See A - B - C POST INTERIOR TRIM - C PILLAR, ASSEMBLY, LH - REMOVE AND REPLACE .
  4. Remove the bolt and locator pin that attach the LH C-pillar bracket to the body.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

    Tip: Use of the following tool(s) is recommended:

    • 10 mm socket
    • Cordless hex driver
    • Torque Wrench Hexagon - 1060071-00-A (for installation only)
    G16590253Courtesy of TESLA, INC.
    G16590254Courtesy of TESLA, INC.
  5. Remove the LH C-pillar bracket.
    G16590255Courtesy of TESLA, INC.