LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel -- Model 3 >> Instrument Panel >> Interior Ducting And Vents - IP, Air, Wave, Duct, RH - Remove And Replace >> Remove

Interior Ducting And Vents - IP, Air, Wave, Duct, RH - Remove And Replace: Remove

  1. Remove the passenger footwell cover. See DASH PANEL - PASSENGER FOOTWELL COVER ASSEMBLY - REMOVE AND REPLACE .
  2. Remove the RH instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
  3. Remove the glove box. See DASH PANEL - GLOVE BOX WITH USB ASSEMBLY - REMOVE AND REPLACE .
    NOTE: No need to remove the glove box USB cable.
  4. Remove the RH footwell duct. See INTERIOR DUCTING AND VENTS - IP, PASSENGER FOOTWELL DUCT - REMOVE AND REPLACE .
  5. Remove the RH airwave duct thermistor. See CABIN HVAC - HVAC, THERMISTOR DUCT - REMOVE AND REPLACE .
  6. Release the clips (x2) that attach the LH airwave duct to the IP carrier.
    G16589559Courtesy of TESLA, INC.
  7. Remove the RH airwave duct from the HVAC module.
    G16589560Courtesy of TESLA, INC.
    G16589561Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals