Interior Ducting And Vents - IP, Air, Wave, Duct, RH - Remove And Replace: Install
- Install the RH airwave duct to the HVAC module.
- Fasten the clips (x2) that attach the LH airwave duct to the IP carrier.
- Install the RH airwave duct thermistor. See CABIN HVAC - HVAC, THERMISTOR DUCT - REMOVE AND REPLACE .
- Install the RH footwell duct. See INTERIOR DUCTING AND VENTS - IP, PASSENGER FOOTWELL DUCT - REMOVE AND REPLACE .
- Install the glove box. See DASH PANEL - GLOVE BOX WITH USB ASSEMBLY - REMOVE AND REPLACE .NOTE: No need to install the glove box USB cable.
- Install the RH instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
- Install the passenger footwell cover. See DASH PANEL - PASSENGER FOOTWELL COVER ASSEMBLY - REMOVE AND REPLACE .