- Remove front license plate from license plate bracket
NOTE:
4x screws, PH2, 3 N.m
 Courtesy of TESLA, INC.
|
- Apply masking tape around front license plate bracket
 Courtesy of TESLA, INC.
|
- Remove front license plate bracket
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Clean surface area of front license plate bracket on front fascia
NOTE:
Allow one minute dry time
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Remove backing from horizontal double-sided tape and top portion of vertical double-sided tapes, bending it outboard of the bracket
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Install front license plate bracket onto fascia
NOTE:
Position front license plate bracket onto fascia, Remove remaining backing from double-sided tape
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Press license plate bracket onto fascia to wet-out double-sided tape
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Remove masking tape from front fascia
 Courtesy of TESLA, INC.
|
- Install license plate onto license plate bracket
NOTE:
4x screws, PH2, 3 N.m
 Courtesy of TESLA, INC.
|