LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Fittings -- Model 3 >> Badges and Films >> Badges - Front T-Badge - Remove And Replace >> Remove

Badges - Front T-Badge - Remove And Replace: Remove

NOTE: The badge cannot be reinstalled if removed. If the badge is removed for any reason, it must be replaced with a new part.
  1. Prepare the badge removal tool with approximately 60 centimeters of monofilament line.
  2. Tie slip knots at both ends of the monofilament line and attach them each to the center groove of a handle.
    G16588369Courtesy of TESLA, INC.
  3. With the hood closed, position the badge removal tool so that the monofilament line cuts under a corner of the front Tesla badge.
  4. Move the badge removal tool in a sawing motion to separate the front Tesla badge from the hood.
    G16588370Courtesy of TESLA, INC.
  5. Use IPA wipes to clean all adhesive residue and debris from the hood surface.
scientia non olet · About LEMON Manuals