Electrical - Wipers and Washers - Windshield Washer Bottle and Pump - Connection Hose Assembly - Remove And Replace: Remove
- Remove the underhood storage unit. See EXTERIOR FITTINGS - LUGGAGE COMPARTMENT TRIM - FRONT LUGGAGE STORAGE COMPARTMENT - FRUNK ASSEMBLY - REMOVE AND REPLACE
.
- Release the clip and then disconnect the main washer hose.
 Courtesy of TESLA, INC.
|
- Release the clips (x4) that attach the washer hose to body and washer bottle.
 Courtesy of TESLA, INC.
|
- Place absorbent material below the washer pump hose connection point to collect spilled washer fluid.
 Courtesy of TESLA, INC.
|
- Release the clip and disconnect the washer hose from the washer pump, and then remove the washer hose from the vehicle.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|