ELECTRICAL - Wipers and Washers - Windshield Wipers and Motor - Wiper Blade DR - Remove And Replace: Remove
- On the touchscreen, touch Controls > Service > Wiper Service Mode to enable "Wiper Service Mode".
- Place a towel or shop rag underneath the wiper arm to prevent scratches on the windshield.
- Release the tab that attaches the LH wiper blade to the LH wiper arm, and then remove the LH wiper blade from the vehicle.WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.NOTE: Releasing and Securing the Tab