LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Body -- Model 3 >> Bumper/Fascia >> Rear Bumper Fascia - Tail Lamp Bracket Assembly, LH - Remove And Replace >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS - REAR BUMPER FASCIA - TAIL LAMP BRACKET ASSEMBLY, LH (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the rear center bracket to the vehicle 4 N.m (2.9 lbs-ft) 
  • 10 mm socket
  • 4 in extension
  • Ratchet/torque wrench
  • Hexagon - 1060071-00-A
Reuse  
Bolts (x2) that attach the LH taillight bracket to the vehicle 4 N.m (2.9 lbs-ft) 
  • 10 mm socket
  • 4 in extension
  • Ratchet/torque wrench
  • Torque Wrench Hexagon - 1060071-00-A
Reuse