LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Fittings -- Model 3 >> Undertray and Diffuser >> Rear Undertray And Diffuser - LH Rear Suspension Cover - Remove And Replace >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS - REAR UNDERTRAY AND DIFFUSER - LH REAR SUSPENSION COVER (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the rear suspension cover to the LH lower rear control arm assembly 6 N.m (4.4 lbs-ft) 
  • Cordless Ratchet/Impact Driver
  • 10 mm deep socket
  • Ratchet/torque wrench
Reuse