Front Bumper Fascia - Assembly, Access Panel - Remove And Replace: Remove
- Remove the front tow hook. See FRONT BUMPER FASCIA - TOW HOOK - REMOVE AND REPLACE .
- Release the clips (x3) and guide tabs (x3) that attach the access panel to the underhood storage unit, and then carefully pull the panel away from the vehicle.CAUTION: Do not completely remove the panel as a harness is still connected to it.
Tip: Grab the panel from the top, and then pull it rearward to release the clips.
- Disconnect the electrical harness from the access panel, and then remove the panel from the vehicle.