LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Body & Frame >> Doors, Windows And Latches -- Model 3 >> Closure Assist Mechanisms and Hinges >> Trunk Hinges And Fittings - Overslam Bump Stop - Remove And Replace >> Install

Trunk Hinges And Fittings - Overslam Bump Stop - Remove And Replace: Install

  1. Install the bump stop to the vehicle.
  2. Remove the masking tape from the vehicle.
  3. Close the liftgate.
scientia non olet · About LEMON Manuals