Front Door Hinges And Fittings - Front Check Strap Seal - Remove And Replace: Install

Install the LH front door check belt seal.

Courtesy of TESLA, INC.
Install the nuts (x2) that secure the LH front door check strap to the LH front door assembly.
10 N.m (7.4 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- 10 mm deep socket
- 2 in extension
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the clips (x3) that attach the check strap seal to the vehicle.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Install the bolt that attaches the LH front door check strap to the vehicle.
24 N.m (17.7 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Flex head ratchet/flex head torque wrench
- 13 mm socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Raise the LH front window and close the LH front door.