2nd Row Seat Back Hardware - 2nd Row Seatback Handle Assembly - RH - Remove And Replace: Remove
- Remove the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
- Remove the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Remove the RH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - RH - REMOVE AND REPLACE .
- Remove the RH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
- Remove the RH 2nd row escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .NOTE: There are 2 clips in the RH 2nd row escutcheon.
- Remove the RH 2nd row seat back latch release bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK LATCH RELEASE BEZEL - RH - REMOVE AND REPLACE .
- Unzip the RH 2nd row seat back upholstery cover.
- Put the electrical harness through the RH 2nd row seat back upholstery cover.
- Release the lower portion of the RH 2nd row seat back upholstery trim cover from the pivot bar.
- Remove the bolts (x2) that attach the RH 2nd row seat back handle to the seat back frame.
Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench
- Remove the RH 2nd row seat back assembly from the frame.
- Release the clips (x2) that attach the RH 2nd row seat back latch control cable to the RH 2nd row seat frame.NOTE: Release the clips based on the marked order.
- Remove the clip that attaches the RH 2nd row seat back handle assembly to the frame, and then remove the handle assembly from the frame.