2nd Row Seat Back Hardware - 2nd Row Seatback Handle Assembly - RH - Remove And Replace: Install

Install the clip that attaches the RH 2nd row seat back handle assembly to the frame.

Courtesy of TESLA, INC.
Install the clips (x2) that attach the RH 2nd row seat back latch control cable to the RH 2nd row seat frame.
NOTE: Install the clips based on the marked order.

Courtesy of TESLA, INC.
Install the RH 2nd row seat back assembly to the frame.

Courtesy of TESLA, INC.
Install the bolts (x2) that attach the RH 2nd row seat back handle to the seat back frame.
2 N.m (1.5 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the lower portion of the RH seat back upholstery cover to the pivot bar.

Courtesy of TESLA, INC.
Put the electrical harness through the RH seat back upholstery cover.

Courtesy of TESLA, INC.
Zip the RH 2nd row seat back cover.

Courtesy of TESLA, INC.
Install the RH 2nd row seat back latch release bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK LATCH RELEASE BEZEL - RH - REMOVE AND REPLACE .
Install the RH 2nd row escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .
NOTE: There are 2 clips in the RH 2nd row escutcheon.
Install the RH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
Install the RH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - RH - REMOVE AND REPLACE .
Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
Install the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .