2nd Row Seat Back Hardware - 2nd Row Seatback Handle Assembly - LH - Remove And Replace: Remove
- Remove the LH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
- Remove the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Remove the 2nd row LH seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
- Remove the 2nd row LH seat back handle bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HANDLE BEZEL - LH - REMOVE AND REPLACE .
- Remove the 2nd row LH seat back center escutcheon. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON - REMOVE AND REPLACE .
- Remove the center armrest assembly. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW ARMREST SYSTEM - REMOVE AND REPLACE .
- Remove the 2nd row LH seat back trim and foam assembly. See 2ND ROW SEAT COVERS AND PADS - 2ND ROW SEAT BACK TRIM, LH - REMOVE AND REPLACE .
- Remove the 2nd row center seat back escutcheon support. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK CENTER ESCUTCHEON SUPPORT - REMOVE AND REPLACE
- Remove the 2nd row LH seat back handle assembly cable from the seat back latch bracket assembly with a clip prytool.NOTE: Release the clips that attach the handle assembly cable to the seat back latch bracket in the sequence and direction as the arrows show.
- Release the clip that attaches the handle cable to the seat frame, and then remove the 2nd row LH seat back handle assembly from the seat frame.