2nd Row Seat Back Hardware - 2nd Row Latch Bracket Assembly - RH - Remove And Replace: Remove

Remove the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .
Remove the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
Remove the RH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - RH - REMOVE AND REPLACE .
Remove the RH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
Remove the RH 2nd row seat back handle bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HANDLE BEZEL - LH - REMOVE AND REPLACE .
Remove the RH 2nd row seat back latch release bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK LATCH RELEASE BEZEL - RH - REMOVE AND REPLACE .
Unzip the RH 2nd row seat back trim cover and release the lower section of the seat back from the pivot bar.
Remove the bolts (x2) that attach the RH 2nd row seat back handle to the seat back frame.
Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench (for installation only)
Courtesy of TESLA, INC.
Remove the RH 2nd row seat back trim cover and foam from the seat back frame.
Remove the clips (x2) that attach the RH 2nd row seat back handle cable to the latch bracket.

Courtesy of TESLA, INC.
Remove the bolts (x2) that attach the RH 2nd row seat back latch bracket to the seat back frame.
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 15 mm socket
- Ratchet/torque wrench (for installation only)
Courtesy of TESLA, INC.
Remove the RH 2nd row seat back latch bracket.

Courtesy of TESLA, INC.