2nd Row Seat Back Hardware - 2nd Row Latch Bracket Assembly - RH - Remove And Replace: Install
- Install the bolts (x2) that attach the RH 2nd row seat back latch bracket to the seat back frame.
40 N.m (29.5 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 15 mm socket
- Ratchet/torque wrench (for installation only)
- Install the clips (x2) that attach the RH 2nd row seat back handle cable to the latch bracket.
- Install the RH 2nd row seat back trim cover and foam to the seat back frame.
- Install the bolts (x2) that attach the RH 2nd row seat back handle to the seat back frame.
Tip: Use of the following tool(s) is recommended:
- Torx T25 socket
- Cordless Ratchet/Impact Driver
- Ratchet/torque wrench (for installation only)
- Zip the RH 2nd row seat back trim cover up and install the lower section of the seat back to the pivot bar.
- Install the RH 2nd row seat back latch release bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK LATCH RELEASE BEZEL - RH - REMOVE AND REPLACE .
- Install the RH 2nd row seat back handle bezel. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HANDLE BEZEL - LH - REMOVE AND REPLACE .
- Install the RH 2nd row seat back hinge bracket. See 2ND ROW SEAT BACK HARDWARE - 2ND ROW SEATBACK HINGE BRACKET ASSEMBLY - LH - REMOVE AND REPLACE .
- Install the RH 2nd row seat back. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEATBACK - RH - REMOVE AND REPLACE .
- Install the 2nd row lower seat cushion. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW SEAT CUSHION - REMOVE AND REPLACE .
- Install the RH 2nd row seat side bolster. See 2ND ROW SEAT ASSEMBLIES - 2ND ROW BOLSTER - LH - REMOVE AND REPLACE .