Interior Trim - Center Console - Center Console - Phone Dock - Clip - Remove And Replace: Install

Fasten the tabs (x2) and datums (x2) that attach the inductive charger into the phone dock.
NOTE: Slide the inductive charger datums into the phone dock, and then fully engage the tabs at the top of the phone dock.

Courtesy of TESLA, INC.
Install the screws (x3) that attach the inductive charger to the phone dock.
1 N.m (.7 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- Torx T20 socket
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Connect the electrical connector, and then install the phone dock to the instrument panel.

Courtesy of TESLA, INC.
Fasten the clips (x4) and tabs (x6) that attach the phone dock to the center console.
NOTE: Slide the datums forward into the center console, and then secure the tabs down.

Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Raise the LH front window and close the LH front door.