LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Long Range >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body -- Model 3 >> Bumper/Fascia >> Front Energy Absorber - Assembly Bumper Beam - Remove And Replace >> Notes

Front Energy Absorber - Assembly Bumper Beam - Remove And Replace: Notes

Last modified: 16/04/2024 19:56:01

Fig 1: Front Bumper Beam Component Location
G16587380Courtesy of TESLA, INC.
NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.