Torque Specifications

TORQUE SPECIFICATIONS - DASH SUPPORT FRAME - CROSS CAR BEAM ASSEMBLY, LHD (REMOVE AND REPLACE)

Description	Torque Value	Recommended Tools	Reuse/Replace
Nuts (x4) that attach the steering column to the cross car beam	15 N.m (11.1 lbs-ft)	Cordless Ratchet/Impact Driver 13 mm socket 3 in extension Ratchet/torque wrench Flex head ratchet/flex head torque wrench	Reuse
Bolts (x2) that attach the LH portion of the cross car beam to the body	29 N.m (21.4 lbs-ft)	Cordless Ratchet/Impact Driver 15 mm socket 3 in extension Ratchet/torque wrench	Reuse
Bolts (x2) that attach the RH portion of the cross car beam to the body	29 N.m (21.4 lbs-ft)	Cordless Ratchet/Impact Driver 15 mm socket 3 in extension Ratchet/torque wrench	Reuse
Bolt that attaches the cross car beam to the HVAC assembly	5.5 N.m (4.1 lbs-ft)	10 mm socket Ratchet/torque wrench	Reuse
Bolt that attaches the cross car beam to the upper side of the cowl	25 N.m (18.4 lbs-ft)	13 mm 12-point combination wrench Flex head ratchet/flex head torque wrench Ratchet/torque wrench 13 mm socket	Reuse
Bolts (x4) that attach the cross car beam to the HVAC assembly	5.5 N.m (4.1 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket 3 in extension Ratchet/torque wrench	Reuse
Bolts (x2) that attach the steering column to the body	25 N.m (18.4 lbs-ft)	Cordless Ratchet/Impact Driver 13 mm socket 3 in extension Ratchet/torque wrench Flex head ratchet/flex head torque wrench	Reuse
Bolts (x2) that attach the LH and RH rear of the center console to the body	7 N.m (5.2 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolts (x2) that attach the LH front of the center console to the body	7 N.m (5.2 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket 2 in extension Ratchet/torque wrench	Reuse
Bolts (x2) that attach the RH front of the center console to the body	7 N.m (5.2 lbs-ft)	Cordless Ratchet/Impact Driver 10 mm socket 2 in extension Ratchet/torque wrench	Reuse