Infotainment - Touchscreen - Instrument Panel - Service Panel - Remove And Replace: Install
- Position the cabin temperature sensor to the instrument panel service panel, and then install the bolts (x2) that attach the sensor to the service panel.
2 N.m (1.5 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- 2 in extension
- Torx T20 socket
- Ratchet/torque wrench
- Connect the temperature sensor connector, and then secure the clips (x2) and tabs (x4) that attach the service panel to the vehicle.
- Raise the RH front window and close the RH front door.