Antennas and Amplifiers - Tuner FM/HD/DAB - Remove And Replace: Remove
- Open the RH rear door and lower the window.
- Fold the 2nd row RH seatback down.
- Remove the RH side rail assembly. See A - B - C POST INTERIOR TRIM - SIDE RAIL ASSEMBLY, LH - REMOVE AND REPLACE .
- Disconnect the backlight harness connector from the tuner.
- Disconnect the package tray speaker harness connector from the tuner.
- Disconnect the body harness connector from the rear of the tuner.
- Remove the bolts (x2) that attach the tuner to the body, release the clip, and then remove the tuner from the body.CAUTION: Be careful that the fixing clip is prone to falling off.
Tip: Use of the following tool(s) is recommended:
- 10 mm deep socket
- 4 in extension
- Ratchet/torque wrench
- Cordless Ratchet/Impact Driver
- Clip pry tool