Front Lights - Head Lamp Assembly ECE, LH - Remove And Replace: Install

Position the LH headlight onto the body.
CAUTION: Do not damage the headlight during installation.
Install the bolts (x2) that attach the LH headlight to the body.
5.9 N.m (4.4 lbs-ft)

Tip: Use of the following tool(s) is recommended:
- Cordless hex driver
- 10 mm magnetic deep
- 6 in nutsetter
- Ratchet/torque wrench
- 6 in locking extension
- 10 mm deep socket
Courtesy of TESLA, INC.

Courtesy of TESLA, INC.
Connect the electrical connector to the LH headlight.

Courtesy of TESLA, INC.
Reinstall the firmware. See SOFTWARE REINSTALL - TOUCHSCREEN .
Install the front fascia assembly. See FRONT BUMPER FASCIA - FASCIA ASSEMBLY - FRONT - REMOVE AND REPLACE .
Remove the lift arms from below the vehicle.
Adjust the headlights by using a wall. See HEADLIGHTS - ADJUST - GLOBAL (WALL METHOD) .
Disable Service Mode. See SERVICE MODE .
Raise the LH front window and close the LH front door.