Trim - Crush Can - Rear Trunk - LH - Remove And Replace: Remove
- Remove the rear trunk load floor. See TRUNK LOAD FLOOR - REAR (REMOVE AND REPLACE) .
- Remove the side trunk load floor. See TRUNK LOAD FLOOR - SIDE (REMOVE AND REPLACE) .
- Remove the trunk tub floor insulator.
- Remove the trunk carpet.
- Remove the LH and RH side rear trunk garnishes. See GARNISH - REAR TRUNK - SIDE - LH (REMOVE AND REPLACE) .
- Remove the trunk sill trim. See TRIM - SILL - TRUNK (REMOVE AND REPLACE) .
- Remove the clips (x6) that attach the rear wall load support to the vehicle.
- Remove the clips (x3) that attach the LH crush can bracket to the vehicle.