LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model X Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Doors, Windows And Latches -- Model X >> Seals Body Enclosures >> Seal - Secondary - Front Door - LH - Remove And Replace >> Install

Seal - Secondary - Front Door - LH - Remove And Replace: Install

  1. Use IPA wipes to clean and remove adhesive residue on the door assembly.
    NOTE: Allow 1 minute of dry time.
    G15392717Courtesy of TESLA, INC.
  2. Position the LH front door secondary seal onto the door assembly, remove the adhesive backing from the seal, and then install the seal onto the door assembly.
    NOTE: Make sure both ends of the seal is installed underneath the front door inner belt seal.
    G15392718Courtesy of TESLA, INC.
    G15392719Courtesy of TESLA, INC.
    G15392720Courtesy of TESLA, INC.