LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model X Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Doors, Windows And Latches -- Model X >> Seals Body Enclosures >> Seal - Inner Belt - Front Door - LH - Remove And Replace >> Install

Seal - Inner Belt - Front Door - LH - Remove And Replace: Install

  1. Remove the adhesive backing from the LH front door inner belt seal, position the seal onto the LH front door, and then secure the clips (x8) and tab that attach the seal to the door.
    NOTE: 8x push clips, 1x tab, Peel sway adhesive tape
    G15392647Courtesy of TESLA, INC.
    G15392648Courtesy of TESLA, INC.
    G15392649Courtesy of TESLA, INC.
    G15392650Courtesy of TESLA, INC.
    G15392651Courtesy of TESLA, INC.
  2. Install the LH front door outer belt molding.
    G15392652Courtesy of TESLA, INC.
  3. Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace) .
  4. Install the LH front door trim decor. See Decor - Trim - Front Door - LH (Remove and Replace) .
scientia non olet · About LEMON Manuals