LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model X Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Doors, Windows And Latches -- Model X >> Latches, Strikers, And Pinch Sensors >> Cable - Cinch - Liftgate - Remove And Replace >> Remove

Cable - Cinch - Liftgate - Remove And Replace: Remove

  1. Remove the liftgate cinching actuator from the vehicle. See ACTUATOR - CINCHING - LIFTGATE (REMOVE AND REPLACE) .
  2. Disconnect the liftgate latch electrical connector.
    G15391494Courtesy of TESLA, INC.
  3. Remove the bolts (x2) that attach the liftgate latch to the liftgate.

    10 N.m (7.4 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • T30 socket
    G15391495Courtesy of TESLA, INC.
  4. Remove the liftgate latch from the liftgate, and then release the liftgate cinch cable from latch arm.
    NOTE: Handle carefully so as to not cause damage to the emergency release cable.
    G15391496Courtesy of TESLA, INC.
    G15391497Courtesy of TESLA, INC.
    G15391498Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals