LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel -- Model 3 >> Instrument Panel >> IP Carrier - Remove and Install >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS: IP CARRIER (REMOVE AND INSTALL)

Description Torque Value Recommended Tools Reuse/Replace Notes
Front passenger airbag to cross car beam bolt 8 N.m (5.9 ft-lbs) 
  • External Torx E10 or Torx T30 socket
  • 4 in extension
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
 Replace  
IP carrier to crosscar beam screws 2.3 N.m (1.7 ft-lbs) 
  • Torx T20 socket
  • 4 in extension
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
 Reuse  
scientia non olet · About LEMON Manuals