LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2023 >> Model 3 Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical System (2 Of 2) -- Model 3 >> Wipers and Washers >> Cap - Reservoir - Windshield Washer - Remove and Replace >> Install

Cap - Reservoir - Windshield Washer - Remove and Replace: Install

  1. Align the locating slot on the cap with the locating tab on the filler neck, and then fully seat the cap onto the filler neck.
    G14744457Courtesy of TESLA, INC.
  2. Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE)